Large Temporary Electric Service Request

The Large Temporary Electric Service Submittal process applies to a temporary service that is any of the following:

• Three phase
• 401Amps or more
• Underground

If that does not describe your temporary service, use the Temporary, Seasonal, and Construction Service Wizard to determine the process for your temporary service request.

To submit a request for a Large Temporary Electric Service, please follow these steps :

1. Submit temporary service plans to your LADWP Engineer through the Service Planning Web Portal.
    
2. Obtain a permit for temporary service from the Los Angeles Department of Building and Safety (LADBS).
    
3. Submit a temporary service application at an LADWP Customer Service Center along with payment of related fees and deposits. For more information, call 1-800-DIAL-DWP (1-800-342-5397) or visit one of our Customer Service Centers. The Customer Service Center will need the following information:
    
   1. LADBS permit number for the temporary service  
   2. Amps needed for the temporary service
   3. The service voltage (typically 120/240)
   4. Phase of the service (single phase or three phase)
   5. Number of wires needed
   6. Will the service be supplied overhead or underground?  
       
4. Contact your LADWP Electric Service Representative (ESR) to determine the location for your temporary service. Your ESR can be located by going to Find the Right Person or by calling the LADWP Connection Center at (213) EMPOWER or (213) 367-6937.
    
5. Install your temporary service in accordance with LADWP Electric Service Requirements.
    
6. Obtain final inspection and approval from the Los Angeles Department of Building and Safety (LADBS).
    
7. LADWP will install the meter and energize your temporary service approximately 7 to 10 business days after receiving final inspection approval from LADBS.