For residential customers, there are several options under the residential rate. You may qualify for Low Income, Lifeline, electric vehicle discounts, or solar/ wind generation. For more details and eligibility, go to Schedule R-1 – Residential Service.
This rate schedule applies to services for single-family residences, single-family with guest house, and individually metered accommodations. This rate also applies to separately metered common areas of condominiums and cooperatives devoted primarily to residential uses and whose energy and capacity requirements do not exceed those for Schedule A-1 – Small General Service. Battery chargers, motors, and appliances which conform in capacities to applicable electrical codes, and meet requirements of LADWP's Rules, may be served under this schedule. This rate is not applicable to single-family residential customers with an on-site transformer dedicated solely to that individual customer. For more information, go to Schedule A-1 – Small General Service.
Season: High season (June – September) or Low season (October – May)
Consumption: Amount of electricity used in each tier
If your billing read dates cross over from low season to high season, or from high to low, your tiers and consumption will be prorated or divided based on the number of billing days in each season. For example, if you use 100 kilowatt hours (kWh) from September 16 to October 15 (15 days in the high season and 15 days in the low season), your consumption will be divided into the two seasons – 50 kWh in the high season and 50 kWh in the low season. Your tier allotments will also be prorated across the seasons.
What are tiers? Your electric costs are made up of Tier 1, Tier 2, and Tier 3 charges that appear on your bill. During the summer high-demand months, this three-tier system is used as an incentive for residential customers to conserve energy.
Tier 1 is the amount of power needed for services such as basic lighting, heating, and refrigeration. Beyond Tier 1 are two more tiers, each with a slightly higher rate. The more energy you are able to conserve, the more you will save on your bill. During the winter months, when demand is lower, Tiers 2 and 3 are billed at the same rate.
Hotter temperatures cause refrigerators and other electrical appliances to work harder and use more energy. Based on that and recommendations from the California Energy Commission, the LADWP has divided Los Angeles into two temperature zones to ensure basic energy use for our customers. People who live in the hotter parts of the city, Zone 2, are allowed a little more energy in Tier 1 than people who live in the cooler areas of Zone 1.
First 350 kWh
First 700 kWh
First 500 kWh
First 1,000 kWh
Next 700 kWh
Next 1,400 kWh
Next 1,000 kWh
Next 2,000 kWh
Above 1,050 kWh
Above 2,100 kWh
Above 1,500 kWh
Above 3,000 kWh
What is the Power Access Charge? The Power Access Charge (PAC) is a monthly fixed charge tied to your highest level of energy use over the last year. You can lower your charge each year by adjusting your energy use. The PAC is also determined by tier and zone, and is the same as the energy use tiers shown in the table above. For example, if you live in Zone 1 and your highest monthly energy use was 600 kWh, then your PAC would be based on a Tier 2 charge. Every October 1st, your PAC will be based on the highest usage in the past 12 months.
Time-of-Use Residential Rate (R-1B)
If your bi-monthly bill consistently has Tier 3 usage, or you are a solar residential customer and you are consistently banking solar credits, then you may be a good candidate for the TOU rate.
This chart is located under the itemized portion of the electric bill.
Time-of-Use (TOU) rates are based on the time of day and season that you use electricity. There are three time periods: High Peak, Low Peak, and Base. The highest cost of usage is during the high peak, followed by low peak, with the lowest cost for usage in the base period.